Polydek is a high performance, liquid-applied waterproofing membrane of styrene acrylic polymer. It consists of a very elastic polymer with the inherent flexibility that allows the membrane to accommodate movements in the substrate. It works as a seamless membrane that performs and adapt to any construction requirements in varied climatic conditions. Greenseal Polydek is supplied in 20 Liter Pail.
Polydek is especially formulated to seal, waterproof and decorate exterior surfaces & roofs. It seals cracks and joints in old or new roofs /walls and simultaneously leaving a seamless finish to the roof surface. Due to its versatility, it can be practically applied to any supported substrates like concrete, asbestos cement, fibre cement and on existing membranes.
In-house Elongation Test
Result: Elongation at Break (>450%)
Prevents further ingression of water in old and new concrete.
Allow vapour transmission to release moisture.
Enforced with fibre glass matt increases film tensile strength and wear resistance.
Tensile strength of 4.6N/m㎡.
Polymeric characteristics enable bridging of hairline cracks and accommodate minor joint movements.
Weather and Strong UV Resistant
Excellent resistance to ultraviolet degradation.
Able to withstand regular foot traffic.
Repairs damaged concrete by direct application without additional re-construction.
Ease of Application
Brush, roller or airless spray applied.
Operators do not need extra respiratory protection.
After 5 – 7 years, recoating can be done to the surface with a refresher or another finish coat.
Ease of Maintenance
Fungus & mold are free on apply surfaces
To substrate with application of primer
Concrete slab roofs
New & old roofs / walls
Car porch roofs
Fibre cement boards
1st coat Greenseal Polydeck - 0.3L/1㎡
2nd coat Greenseal Polydeck - 0.3L/1㎡
3rd coat Greenseal Polydeck - 0.3L/1㎡
NEW IMPROVED VERSION: POLYDEK Super P (Polyurethane + Acrylic)